SIMPLE - The Penny Pincher pump-off controller achieves pump-off detection by measuring pumping speed increases, in milliseconds, as the well pumps down (patented U. S. Pat. Ofc. # 4,873,635).
By eliminating strain gauge or load cell, D-Jax offers pump-off control that is less costly to purchase, install and maintain.
Also, the Penny Pincher is far simpler to calibrate and it stays calibrated. No special training, equipment or calibration is required to keep Penny Pinchers operating at peak efficiency.
RELIABLE - The Penny Pincher is not only simple and user friendly, it is also one of the most reliable pump-off controllers available.
Fiber optic circuitry greatly reduces the chances of catastrophic damage to the controller logic board from power surges and/or electrical spikes. Should a Penny Pincher go down, a field hand can easily unplug the boards, remove the screws, replace a board and in only a few minutes, have the Well and Penny Pincher back online and be on his/her way. SIMPLE.
No strain gauges or load cells eliminates a complicated maintenance “trouble spot” associated with ALL other pump-off controls.
UNIVERSAL APPLICATION – The D-JAX "time based" method of pump-off detection used by the Penny Pincher allows for a wide range of applications. Penny Pinchers are in daily use around the world for shallow and deep wells (13,000 feet), high volume and "stripper" class low volume wells.
And now, with the new PLUS™ Modbus protocol option, the Penny Pincher can be easily and inexpensively upgraded to allow for SCADA Telemetry and easy transmission of well operating parameters to your remote desktop.
ECONOMICAL – Not only does the Penny Pincher simplicity of design result in lower operating and maintenance costs, its penny pinching acquisition cost means you can have more of them in service.
Studies by oil producers have shown the Penny Pincher to be 40% to 60% less costly to maintain than "complicated" controllers. And, due to the simple, set-and-forget calibration, the Penny Pincher works and works and works.
It is a "no-brainer" for field hands to maintain.
NOW WITH TELEMETRY!
Introducing the D-Jax, Penny Pincher PLUS™ Well Controller.
The PLUS™ features all of the well-known advantages of the Penny Pincher controllers such as simplicity, dependability, reliability and low acquisition and maintenance cost. Now, we’ve added load cell interface to collect operational well data such as loads, surface and down hole dynamometer cards and the last five dynamometer cards prior to "shutdown".
PLUS, we’ve added SCADA Telemetry.
The Penny Pincher PLUS can now be deployed – or field upgraded to Modbus protocol and easily compatible with Cellular, RF or Satellite SCADA communications. From a local field to a worldwide Internet network, the new
D-JAX Penny Pincher PLUS delivers intelligent data to your PC in a fraction of the time – for a lower cost.
Operators of standard Penny Pinchers can easily upgrade to Penny Pincher PLUS controllers. PLUS D-JAX can provide technical expertise to help deploy a functional system – also in a fraction of the time you might expect from "complicated" systems.
Contact D-JAX today about upgrading to Penny Pincher PLUS Telemetry – or simply by adding Telemetry to your existing Penny Pincher controller.
