Reliable, economical and accurate

Penny Pincher 2

Pump off control

Reduce operating costs

Save thousands of dollars per year receiving only the information that you need from your pump off controls.  The Penny Pincher has had over 13,000 successful field installations which have helped reduce operating costs and increased profitability in field operations.

Universal Application

The “time-based” method of pump detection used by the Penny Pincher 2 allows for a wide range of applications. Penny Pinchers have been successfully applied to shallow and deep wells (13,000 feet), low volume and high volume wells.

No strain gauges or load cells eliminates a complicated maintenance “trouble spot” associated with ALL other pump-off controls.

Penny Pincher Pump Off Controls have been applied to a broad range of beam pumped wells. shallow wells and deep wells (13,000 + feet), wells with difficult pumping conditions, stripper wells and high volume wells have all benefited from the application of D-Jax pump off controls. The low acquisition cost makes the Penny Pincher an excellent choice for “stripper” type wells that cannot justify the expense of more costly controls.

Simple

Eliminating load cells and strain gauges means the Penny Pincher is a very “user friendly” device for field personnel to operate and maintain. The Penny Pincher is simple to calibrate and stays calibrated. No special training or equipment is necessary to keep Penny Pinchers operating at peak efficiency.

Reliable

The Penny Pincher 2 is not only simple and user friendly, but it is also one of the most reliable pump off controls available. Fiber optic circuitry greatly reduces the chances of power surges and electrical spikes causing catastrophic damage to the control logic board.

Economical

Eliminating load cells and strain gauges means the Penny Pincher is a very economical device to purchase, operate and maintain. The simplicity of the Penny Pincher design means field personnel will spend less time performing repairs and maintenance. Also, the absence of load cells and strain gauges eliminates a costly maintenance “trouble spot” associated with load cell controls.

Open Hours

Mon:8am - 5pm
Tue: 8am - 5pm
Wed: 8am - 5pm
Thur: 8am - 5pm
Fri: 8am - 5pm
Sat-Sun: Closed

Send A Message